Send SMS


Product Image (KCMISC-116-RGPV)

Smoke Point Apparatus

• Conforms to: ASTM D1322; ISO 3014; IP 57 • Cotton Wicks - Prepared in accordance with ASTM D1322 • 0-50mm black glass scale with white markings • brass plated door with curved glass window • Candle socket; and plated brass candle with wick tube and air vent. • Mounted on a cast iron base with aluminum support rod

Product Image (KCMISC-111-RGPV)

Kinematics Viscosity Bath

• In accordance with ASTM D445, D2170, D6074, D6158; IP 71, 319; ISO 3104; DIN 51550; FTM 791- 305; NF T 60-100. • Dual display microprocessor based PID digital temperature controller. • Temperature range: 10 to 150°C • Control accuracy = ± 0.1°C • Universal Viscometer holder and tray

Product Image (KCMISC-113-RGPV)

Pensky Martin Closed Cup Apparatus

• As per IP – 34 & ASTM D-93 & IS – 1448 P-21. • temperature range up to 400°C with digital display. • Electrically Heated Model with Stirrer Motor. • Accessories: ASTM 9C Thermometer: 02 in number. • Cover Assembly: Complete assembly. Includes shutter, flame exposure device, stirrer and thermometer ferrule. Brass Test Cup With heat resistant handle. • Viscometer holder will be provided along with the viscometer tube.

Product Image (KCMISC-103-RGPV)

Aniline Point Apparatus

• Conforms to the specifications of: ASTM D611; IS 1148; ISO 2977; DIN 51775; FTM 791-3601 • ASTM 34C thermometer IP-20C, IP-21C • U tube Aniline point apparatus will be provided. • cover assembly with bath stirrer; sample stirrer and cooling coil; 6V lamp with line cord; and drive motor. • Heater with variable steeples control of heating rate and 6V tap for lamp

Product Image (KCMISC-104-RGPV)

Api & Specific Gravity Measurement Hydrometer

• Conforming to the specifications of: ASTM E100 • Applicable Test Method Standards: ASTM D287, D1298, D6074, D6158 • API gravity range: ASTM hydrometer No: 2H, 3H, 4H, 5H, 6H, 7H & 8H • Specific Gravity: ASTM Hydrometer No: 82H, 83H, 84H, 85H & 86H • Each of API & specific gravity hydrometer will be calibrated as per ASTM. Calibration certificate will be provided. • Accessories required: 1000 ml Glass graduated cylinder, thermometer for temperature measurement will be provided. • An instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus.

Product Image (KCMISC-107-RGPV)

Conradson Carbon Apparatus

• Conforms to the specifications of: ASTM D189, D6074 • Accessories: Porcelain Crucible, Skidmore Crucible with Iron Cover, Iron Crucible with Cover, Iron Hood with Bridge, Refractory Block, Nickel-Chrome Triangle Wire Support, Tripod, Burn will be provided.

Product Image (KCMISC-106-RGPV)

Cannon Fenske Viscometer Tube

• Cannon-Fenske Routine Specifications: ASTM D446, ISO 3105, IP 71 Part 2, BS188 • Cannon-Fenske Routine Test • Methods: ASTM D445, ISO 3104, IP 71 Part 1, BS 188 • Viscometer number of tube = 25, 50, 70 and 100 • Viscometer will be calibrated and calibration certificate will be provided. • Viscometer holder will be provided along with the viscometer tube.

Product Image (KCMISC-101-RGPV)

Abel Closed Cup Flash Point Tester

• Conforms to the specifications of: ASTM D93 – IP 34 Methods A & B, IP 170 • Ambient to 370°C temperature range • Variable ramp rate, Integral two speed stirrer • For flash points between -30°C and 70°C • Equipped with a 400W nickel-chromium heater with steeples variable heat control for accurate repeat setting of temperature rate of rise per specifications • Brass Test Cup with Handle • Thermometer Holder (2) • ASTM 9C and 10C thermometer (02 each)

Product Image (KCMISC-108-RGPV)

Automatic Digital Refractrometer

• Conforms to: ASTM D1322; ISO 3014; IP 57 • Conforms to ASTM D1218, D1747 and D5006 test specifications • Calibration: one point (water)/ two point • Measuring Range-Refractive index nD = 1.3200 to 1.7000 • Measuring accuracy- Refractive index nD = ±0.0001 • Measuring resolution-Refractive index nD = 0.0001 • Temperature measurement with integrated temperature sensor Pt100 with temperature compensation mode available. • Integrated temperature control • Temperature control Range = 10 - 80°C • Accuracy of Temperature control = ± 0.1°C • Temperature measurement range = 10°C - 80°C • Temperature measurement Accuracy = ± 0.1°C • Temperature measurement resolution = 0.1°C • Display = Touch Screen • Interface: USB, RS-232, Ethernet • Brix (BX) = 0 – 95%

Product Image (KCMISC-102-RGPV)

Analytical Balance

• Capacity : 220 gms • Readability : 0.1 mg • Volts : 12 V DC Repeatability • (Std. Deviation) : ≤0.1mg • Linearity : ± 0.2mg • Response Time : 3 secs. • Operating ambient Temp : 5 to 40 Deg.C Pan Size : 80mm dia approx Temp. Coefficient of sensitivity (10 to 30 Deg.C) : +/- 2ppm/ Deg.C (When PSC is OFF) Sensitivity stability Against temperature change (10 to 30 Deg.C) : +/-2ppm/ Deg.C (When PSC is ON) • Various units available • Built-in calibration weight • Perfect Self Calibration Function • Built-in Clock Function • GLP/ GMP/ ISO Calibration Report • Windows Direct Function • Interval Timer Output • RS-232 I/ F • Specific Gravity measurement software • Piece Counting Function • % Display Function • Unit Conversion • Analog Display Function

Product Image (KCMISC-112-RGPV)

Muffle Furnace

• Outer cover made of double walled CRCA sheet, duly epoxy powder coated. • Working temperature up to 1100 oC max. design for max. over shoot temperature up to 1200 oC., soaking time for continues working temp. 1100 oC, max. 8 hours. • Sensor provided will be CHROMEL / ALUMEL Thermocouple, with High temperature ceramic sheathed and back side mounting facility. • Control panel provided at Top of the Muffle furnace with sufficient gap for air pass through & no direct contact of outer body of Muffle furnace with the control panel. • High temperature Muffle Furnace manufactured & designed to work up to 1100 oC, as mention features, • Furnace operating temperature 1200 oC max., with continuous sock time operation 4-6 hrs., at 1100 oC. • Temperature Controller PID Profile with 4 amp & 4 Soak step control logic. • Control logic with SSR control power pack & PID temperature controller.

Product Image (KCMISC-114-RGPV)

Ph Meter

• pH meter with digital display, pH range 0 – 14, mill volt Range : 1 to ± 1999mV • Resolution : 0.01 pH & 1 mV in mV mode • Repeatability: ± 0.01 pH, ± 1 digit for pH, ± 1 mV in mV mode, ± 1 digit for mV • Slope correction: 85% to 115% • Table model with Probe and Automatic Temp. Compensation

Product Image (KCMISC-105-RGPV)

Automatic Electrically Heated All Glass Distillation Apparatus

• Flask capacity: 5 litres • Metallic stand for Single Distillation Apparatus: Complete with one ring to hold flask, one clamp to hold the double walled condenser, electric board with switch. Neon light indicator and connecting cord for flask and mains.

Product Image (KCMISC-109-RGPV)

Hot Air Oven

• Tripled walled construction • Inside S.S. 304 mirror finish. • Outer Mild steel (CRCA) sheet with powder coated • 3” High grade heavy glass wool insulation ensures stable temperature & reduced energy consumption • Air Recirculation by Motorized Blower on top side of the chamber to ensures maximum uniform temperature distribution inside the chamber 1/12 HP, TEFC , F-class insulation, Single Phase, 1440 RPM, 230 Volts • S. S. tubular heating elements on side walls to maintain uniform condition inside the chamber • Safety cum stand by thermostat to cut off the heater supply in case of overshoot of temperature • Single door fitted on heavy cast and chromium plated hinges with spring and roller type latch with Asbestos gasket. • Stainless Steel Rod Trays to ensure uniform temperature distribution 230V AC, Single Phase, 50Hz supply • Temperature Range: 5°C above ambient to 250°C will be provided. • Temperature Accuracy: ± 0.2 °C • Temperature Uniformity: ±1 °C • Control System: Imported Microprocessor based auto tuned PID controller with CE mark & dual display of set value & process value for precise control of temperature. Capacity 216 litres with 3 trays will be provided.

Product Image (KCMISC-110-RGPV)

Hot Plate With Stirrer

• Construction: A thick gauge Mild Steel (M.S.) body • A thick well machined and smooth cast iron top and grooved from bottom to circulate spiral heaters. • Heating element is housed into the grooves with porcelain beads underneath of the cast iron • Dimension: 20.5 cm • Rating: 1KW • Max. Temp: 300°C with thermostatic controller • Imported auto tuned PID Controller cum Indicator with K type Sensor • Maximum stirring speed-1200 rpm with stepless speed control and good speed stability

Product Image (KCMISC-100-RGPV)

Air Compressor

• 1 HP, 4 CFM with automatic switch


Back to top